DFY hard tooth surface reducer factory

DFY hard tooth surface reducer is a power transmission mechanism that uses a gear speed converter to reduce the number of rotations of the motor to the desired number of rotations and obtain a larger torque.What is the reason for the excessive temperature rise of DFY hard tooth surface reducer?

1.The temperature difference between the gearbox and the environment is called temperature rise,which is caused by the heating of the DFY hard tooth surface gearbox and indicates the degree of heating.During operation,if there is a sudden increase in temperature rise,it indicates that there is a fault,or the air duct is blocked or the load is too heavy.

2.During the expected lifespan of the design,the temperature of the hot spot in the winding insulation during operation is the working temperature of the insulation material.If the operating temperature exceeds the working temperature of the material for a long time,the aging of the insulation will intensify and the service life will be greatly shortened.Therefore,temperature is one of the main factors affecting the lifespan of DFY hard tooth surface reducers during operation.

3.The iron core of the DFY hard tooth surface reducer in operation will experience iron loss when exposed to an alternating magnetic field,and copper loss will occur when the winding is energized.All of these will cause the temperature to rise.
4.The DFY hard tooth surface reducer also dissipates heat.When the heat generation and heat dissipation are equal,the equilibrium state is reached,and the temperature no longer rises but stabilizes at a certain level.When the heat generation increases or the heat dissipation decreases,the balance will be disrupted,causing the temperature to continue to rise and expand the temperature difference,thereby increasing heat dissipation and reaching a new equilibrium at another higher temperature.
Through the introduction of DFY hard tooth surface reducer factory,with the widespread application of reducers in various fields of economic production,users are increasingly concerned about the impact of temperature rise on DFY hard tooth surface reducers.